Door polishing & restoration · Inayath Khan

Doors that
come back to life.

One pair of hands, one bench. I strip, repair, sand and hand-polish solid wood doors — teak, walnut, oak, mahogany — until the grain shows again. No new doors. No joinery. Just the door you already own.

Doors polished
1,800 and counting
Typical turnaround
2–4 days
Finish
Hard-wax oil · satin
Scroll

Before & after

The same door,
six hours apart

On the left: a teak entrance door after eight summers — sun-bleached, chalky, dry to the touch, with the old varnish flaking off the mouldings. On the right: the same door after stripping, three grits of sanding and two coats of hard-wax oil, buffed by hand.

No replacement panels, no veneer, no dark stain hiding the grain. If the timber is sound, it can be brought back — and you keep the door that already fits its frame.

  • Deep clean and strip of old varnish or paint
  • Scratches, dents and water marks repaired
  • Sanded through 80, 120, 240 and 400 grit
  • Grain filled and tone-matched to the room
  • Two coats hard-wax oil, hand-buffed to satin
The teak door after polishing: deep amber grain, satin sheen, brass lever.
Teak entrance door, Hubli–Dharwad. Stripped, sanded to 400 grit, two coats of hard-wax oil. Drag the handle — or use the arrow keys.

Scroll to turn the door

What polishing actually does

  1. 01

    Assess, then strip

    The door comes off its hinges. Old varnish, wax and paint are lifted with a scraper and a gentle solvent — never a belt sander on a veneered face.

  2. 02

    Repair the wounds

    Dents are steamed out, splits glued and clamped, missing moulding cut to match the original profile. Filler only where the timber is gone for good.

  3. 03

    Sand through the grits

    80 to level, 120 to shape, 240 to close the pores, 400 by hand with the grain. Skipping a grit is why most DIY polishing looks cloudy in raking light.

  4. 04

    Oil, then buff

    Hard-wax oil is worked in warm, left to soak, then buffed off before it tacks. Two coats, and the grain reads deep instead of sitting under a plastic film.

Doors through the bench

Recent work

Studio films

Moving over the timber

Rendered from the bench’s own door model — a full turntable, a pass over the carving, and the polish mop travelling down the grain.

Turntable — teak

One door, every face, one light.

Pass — walnut carving

A 6 mm gouge, up close.

Polish pass — teak

The mop, the oil, the grain.

How a door is booked in

Four steps, one door

  1. 01

    Send a photo

    WhatsApp a picture of the door with its rough size. I reply with a fixed price and a date — no visit needed for a standard door.

  2. 02

    Off the hinges

    I lift the door, take it to the bench and strip it back. Hardware comes off, glass and inlay are masked before anything touches the timber.

  3. 03

    Sand & polish

    Repairs, four grits, grain-fill, tone match, then two coats of hard-wax oil buffed to satin. Photographs go to you before it leaves the bench.

  4. 04

    Back on its hinges

    Refitted, aligned and adjusted the same day wherever possible. Care card left behind, and a two-year guarantee on the finish.

1800doors polished
14years at the bench
48hours, a single door
100percent by hand
Macro view of polished rosewood grain.
Teak, sanded to 400 grit, an hour before the first coat.

The bench

One maker, one bench

I’m Inayath Khan. I don’t build doors — I bring them back. Everything happens at a single bench in Hubli–Dharwad: no spray booth, no production line, no team of hands touching your door.

Most of what I’m asked to fix isn’t damage, it’s neglect: a finish that dried out, a scratch someone tried to hide with a marker, a door that was varnished twice and never sanded. Almost all of it comes out with patience and the right grit.

  • Solid wood only — teak, walnut, oak, mahogany, rosewood
  • Hand-sanded and hand-polished, never sprayed
  • Low-sheen hard-wax oil that can be repaired, not stripped
  • Pickup, delivery and refitting around Hubli–Dharwad
Call 93418 31601

“I was ready to replace the front door. Inayath sent back the same door looking like it had been made last month — and it still closes with the same click.”

— S. Reddy, Jubilee Hills

“Four interior doors, all with water marks from a leak. He matched the tone on every one and finished them in three days. No smell, no mess left behind.”

— F. Ahmed, Banjara Hills

Book a door

Send a photo of the door

Tell me the rough size, the timber and what’s wrong with it. A photo is worth more than a paragraph — I’ll reply with a fixed price and the next free date.

  • MakerInayath Khan
  • Telephone93418 31601
  • WhatsAppSend a photo
  • AreaHubli–Dharwad & 40 km around
  • HoursMon–Sat, 9:00–19:00

Submitting opens WhatsApp with your details already written out — attach a photo of the door in the chat.

Call now WhatsApp